We are closed for some Christmas holidays, and opening up again on the 7 of January 2025.
LIMITED support during this period.

Product ID: 1789
Exhaust gas temperature sensor 1.8m 4.7mm covered tip
Exhaust gas temperature sensor 1.8m 4.7mm covered tip
Exhaust gas temperature sensor 1.8m 4.7mm covered tip

Exhaust gas temperature sensor 1.8m 4.7mm covered tip

$108.68

Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. mini type-k contact. 1/8 NPT.

in stock
QTY:
More information

Primarily designed to be connected directly to MaxxECU, but obviously work with other systems aswell.
4.7 mm thickness of the sensor.
Reaciton time: 1250ms
-100 to 1300 degress Celscius (-148 to 2375 F)
Covered sensor tip. May be needed with ALS and some race E85 fuels.


For tapered thread compression fitting to the stainless steel bung: about 2.5 turns to finger tight, then 3/4 of a wrench turn.
For tapered thread compression fitting to the mild steel bung: about 3.25 turn to finger tight, then 1 wrench turn.

What is important is that the threads do not leak. If the fitting is overtightened with a wrench the fitting will be impossible to remove. It is important that the fitting is not overtightened.