IAT / MAT sensor, air temp
Requires a 12mm hole in the intake / pressure pipe and screwed.
Measures up to 120 degrees.
Delivered without connectors!
Air Temperature Sensor which uses a high temperature, fast responding NTC thermistor. The thermistor body is coated with a blue insulating lacquer.
Intake temperature sensor (IAT) M12X1.5.
Very fast sensor because the element itself is open.
Withstands temperatures up to 150 degrees. Supplied without connectors.
-20deg C = 15.462ohm
130deg C = 89ohm
Temperature sensor with 1/8 NPT connection.
90 degrees angle. -40 To +150 degree range. standard NTC
Uses a high temperature, fast responding NTC thermistor. The thermistor body is coated with blue insulating lacquer.
Temperature sensor Bosch.
CLT sensor, water temp
M12x1.5mm thread. Resistant to water and oil. Up to 140 degrees.
Delivered without connector!
Weld nut in aluminum
16mm in diameter.
Intended for use with the intake building which requires an intake temperature sensor.