fuel pump priming
fuel pump prime time
Specifies the fuel pump prime time in seconds used by the system when you power on the MaxxECU, default is 3 seconds.
Start fuel
Cranking fuel
Specifies the amount of fuel to be injected, depending on temperature at start up (while cranking).
Configuration --> Engine settings, Engine max crank rpm <-- RPM to determine if engine is cranking or not.
cranking fuel hold time
Specifies the time in seconds the cranking fueling will be added even after the engine is considered started (engine RPM over the crank rpm).
cranking fuel ramp out time
Specifies the time in seconds for how long the cranking fuel will be ramped down after the fuel hold time has passed.
warmup enrichment
Warmup fuel
Specifies (in percent) how much extra fuel to be injected based on coolant temperature (CLT) when the car is considered to be running.
Note: Most right cell must me 0.
afterstart enrichments (ASE)
Afterstart enrichment
Specifies (in percent) how much extra fuel to be injected when the engine is considered started for a short period of time.
Note: Most right cell must me 0. After 300 seconds ASE is automatically zeroed out.
