Note: PDM is under development, will be officially released during 2019.
Note on REV2 PDM Prototype test units: The planned low power sleep isn't available on these units yet. Even with all outputs off, the PDM draws 0.07A constantly. Use a battery disconnect switch for extended storage periods (a low power mode will be available in production units, drawing 0.1mA in sleep mode).
Pdm general settings
5V output activation
How the activation of the PDM +5V power supply output enables.
•Always on - +5V output on the PDM will allways be enabled.
•ECU turn on - will only output +5V when the ECU is turned on (PDM outputs --> ECU supply).
Automatic fault reset
Option to clear all error codes when ECU is turned on.
•clear faults when ECU is turned on - Will clear all stored error codes after ECU is turned on.
The above example will clear all stored error codes when the ECU is turned on.
Note: More examples and information will be available here when product is available.